Buttery smooth

 

Buttery smooth. Those words kept forming in my mind as I rode this bike on its shakedown, on the grueling and not altogether enjoyable Gilford run after dropping my car off for spring service. The route is tediously familiar, with its hills and its tight, narrow stretches shoulder to fender with drivers indifferent to your survival, but it's also peaceful and beautiful for quite long portions. And, being so familiar, it was a perfect proving ground to test out this bike.

I figured it would be great, because the frame is a version of  the Surly Cross Check. If I could only own one bike, it would be a Surly Cross Check. Agile on pavement, but sure-footed on dirt, built of reliable steel and configured so that it can be adapted to many options, it's not a bike to take out with the local hammerheads on a take-no-prisoners road ride, but it will definitely get you most places you want to go if there's a mapped public right of way to get there. I built my first one to make the dirt variations of my commuting route more pleasant. It has evolved into a practical beast, with generator lighting. In the process it became a little hefty. Surly bikes aren't for weight weenies anyway. Add a few pounds of practical accessories and the package bulks up even more. 

The Traveler's Check frame on which today's bike was built has S&S couplers so that the bike can be taken apart and fit into a checkable standard size piece of luggage. I bought it when I had delusions of traveling. The first build was kind of slapped together: hence that saddle. That thing came off the bike as soon as I got home. Blue Version 1 was a fixed gear, the simplest to take apart and reassemble in a train station or airline terminal for short hops around a destination city. But that never happened, and now it won't. So I had a frame ready to build up without some of the heavy add-ons that encumber my daily commuter, to recapture some of the comfortable nimbleness of the original 'Check.

Buttery smooth. The bike rode like an extension of my body. I shouldn't be surprised, since I had built it to the same dimensions as its older sibling, but I had set the bars a little higher by leaving the fork a little longer. I was looking ahead to its touring configuration, where I might want to sit up just a little more, to take in the scenery. Fortunately, it's not so high that it kills the handling. In fact, the stem attaches higher, but drops more than on the other bike, so the bar height nets out about the same.

The first thing I noticed was that the bike seemed twitchier. But twitchier soon settled down to "more responsive." The commuter has a heavy dynamo front wheel. The SRAM dyno hub wasn't the slickest on the market to begin with, and now it's probably pushing ten years old. If I could scrape up the coin for a Schmidt I would. A generator hub has some rolling resistance all the time from the magnets. This increases slightly when the lights are switched on. You get used to that, but notice the difference on a bike that doesn't have it. Hence the impression of twitchiness on the bike with the plain front hub.

I use the lights in daylight in certain situations to enhance visibility in a few intersections where the sight lines make it worthwhile. Not having them felt like a bit of a loss. I had blinky lights for front and rear, but I like being able to pair those up with a full-size, solid beam headlight to present a more vehicular impression as I bomb into a crossroads or shoot a stretch of town traffic where drivers like to pop out of parking lot exits when they don't think anyone who can hurt them is coming. So maybe I get a more aggressive battery light for the handlebars of Blue 2.0.

I feel my age. I'm in some kind of pain most of the time. That made the performance of Blue 2.0 all the more impressive. I felt pretty crappy, but still peppy because the geometry and setup of the bike supported me so well.

The gearing is mostly the same between the two bikes. On the commuter -- code named Green now -- I have 30-36-48 for chainrings and a Frankencogged 8-speed cassette of 13-15-17-19-21-24-27-30. On Blue it's 28-36-48 in the front and a Frankencogged 8-speed cassette with the same cogs from 13 to 24, leading up to a 28 and a 32. I anticipated riding with a touring load, which could still happen. So the mid-range cruising gears were the same. Shift points didn't change, cadence wasn't thrown off. I might re-gear Green a little bit, though maybe not exactly the same. The great thing about friction shifting and separate cogs is that you can really customize your gearing to your specific physical and riding conditions. This adaptability has been largely eliminated by the industry. Many technolemmings have never experienced it.

The car is taking longer than planned. I'm living without it for a couple of days. That's not as casual an undertaking as it was, but you do what you have to do. I wish I still believed in pain relievers. Today's ride is Green, the fully lighted commuter, because -- hopefully -- I'll be heading out on the hell run to Gilford after work, and the sun could be setting by the time I get to the garage to retrieve my motor vehicle.