We planned in February to go away at this time in April. So now the repair shop is undergoing its busiest April since the beginning of the 21st Century.
We have a couple of good trainees, one in particular with the time and inclination to show up regularly, but it was looking like they'd have to fly solo way too soon.
Fortunately, a former star of the workshop has agreed to make a guest appearance while I'm gone. The shop's alpha couple is also going away next week, so Alpha Male made the plea. So the trainee will be in excellent hands. Guest Star just returned from a year engagement at the illustrious Harris Cyclery. A bike he built there was purchased recently by Grant Petersen of Rivendell. It uses a fascinating two-gear system called retro-direct. Like a bizarre magic trick, pedaling forward gets you one gear and pedaling backward gets you another one.
Guest Star has become like so many area celebrities, spotted by others and seen only briefly by me. He'll be working because I'm not there, so I don't get to work with him. But at least I'll know he's there spreading the good training to the student mechanic.
Some advice and a lot of first-hand anecdotes and observations from someone who accidentally had a career in the bike business.
Friday, April 18, 2008
Wednesday, April 16, 2008
Christmas was spoiled
The Traveler's Check showed up a day early today. This might have given me time to slap together a kit to bring it along on the plane this weekend. But somewhere along its long journey from the factory to Minneapolis and on to New England, the right rear dropout got crushed.
The box didn't look bad from the outside. The opposite end had been dented, where the fork would be if it was in the frame, but the fork was in a separate box. But when I pulled the main frame up I saw right away that there was no bracing block in the rear dropouts. It was loose in the plastic bag that covered the frame.
On the plus side, after a quick exchange of phone calls, a call tag for the old frame and a replacement frame had both been dispatched from Surly. Thanks, Aaron! Too bad the new frame won't get here before I leave.
The new frame has some great improvements over the one I got in 2000. The long dropouts are even longer and have double eyelets. The seat stays have rack bosses on them. And the frame comes with the awesome new Surly stainless steel rear brake cable hanger. The hanger is extra long for smoother cable routing, and has a threaded adjuster so it's easier to substitute wheels with different-width rims.
The box didn't look bad from the outside. The opposite end had been dented, where the fork would be if it was in the frame, but the fork was in a separate box. But when I pulled the main frame up I saw right away that there was no bracing block in the rear dropouts. It was loose in the plastic bag that covered the frame.
On the plus side, after a quick exchange of phone calls, a call tag for the old frame and a replacement frame had both been dispatched from Surly. Thanks, Aaron! Too bad the new frame won't get here before I leave.
The new frame has some great improvements over the one I got in 2000. The long dropouts are even longer and have double eyelets. The seat stays have rack bosses on them. And the frame comes with the awesome new Surly stainless steel rear brake cable hanger. The hanger is extra long for smoother cable routing, and has a threaded adjuster so it's easier to substitute wheels with different-width rims.
Monday, April 14, 2008
A Benefit of Wrenching
Other people's full suspension bikes are like other people's kids. If they're behaving well it's fun to play with them, but it's great to give them back and let someone else worry about all the boring and annoying details of their lives.
As a mechanic, I get to test ride almost every bike that comes through. After working on someone's dualie I can bounce it around the back parking lot or shoot a few laps around my little obstacle course, and that's enough for me.
I didn't quit mountain biking because I didn't like my mountain bike. I quit mountain biking because I don't really like mountain biking. A little goes a long way anymore. But someone else's modern technological marvel is fun for a brief diversion. Sometimes very fun.
As a mechanic, I get to test ride almost every bike that comes through. After working on someone's dualie I can bounce it around the back parking lot or shoot a few laps around my little obstacle course, and that's enough for me.
I didn't quit mountain biking because I didn't like my mountain bike. I quit mountain biking because I don't really like mountain biking. A little goes a long way anymore. But someone else's modern technological marvel is fun for a brief diversion. Sometimes very fun.
Thursday, April 10, 2008
The Rubber Meets the Road
First commute today. Along parts of the route near my home, snowbanks encrusted with frozen dirt still crowd the road, but they've melted back from all the rest of it.
Ordered the Traveler's Check today. I will need to get a few parts to set up the first kit for it, but they're mostly standard. I wanted to be sure I got the frame in case they run out. I'll change out the axle in a two-sided hub to have 130 mm spacing and a quick-release on its fixed gear wheel. Any front wheel will do.
A time trial bar will pack nicely in the case and provide all the positions I would use in traffic. But of course with removable face-plate stems you can slap in any bar that fits the clamp.
Possibilities. It's all about possibilities.
Ordered the Traveler's Check today. I will need to get a few parts to set up the first kit for it, but they're mostly standard. I wanted to be sure I got the frame in case they run out. I'll change out the axle in a two-sided hub to have 130 mm spacing and a quick-release on its fixed gear wheel. Any front wheel will do.
A time trial bar will pack nicely in the case and provide all the positions I would use in traffic. But of course with removable face-plate stems you can slap in any bar that fits the clamp.
Possibilities. It's all about possibilities.
Monday, April 07, 2008
Where have all the headsets gone? And other musings.
Wish-book spec'ing my Traveler's Check, I discovered that my favorite headset, the FSA Orbit UF, has disappeared from the Quality catalog. Far East doesn't carry it, either, which didn't surprise me.
Full Speed Ahead still shows it in their lineup on the company website. I haven't launched a wider search for a distributor because we're not open with any of them. For one or two headsets I would scout around for a discount source, probably online. But I haven't given up on finding a good source not only for me but for customers for whom I frequently prescribed the headsets.
Needle bearing headsets seem to have gone completely out of fashion in favor of various kinds of balls. Is that because they never wear out, so companies realized they needed to kill off the product before it killed them?
Neither the Quality nor the Far East catalog show any needle bearing headsets. And a reader has reported to me that he managed to find a Stronglight one for his bike, but was told they're running out and no more will be available.
I haven't picked a second choice yet. I'm not on the Chris King band wagon. I have always liked finding the "just right" component for a mid-range price rather than just plunking down the biggest bucks and assuming I'm getting the best. It's like finding that undiscovered cheap wine that confounds the experts. The price may be in the upper mid range, but it's still not in the queue with the high-end lemmings jumping off a particular brand name cliff. That's why the FSA Orbit UF was so attractive. Great product, great price and no one looked twice at it. It just sat there doing its job. Oh well.
I guess some kind of cartridge bearing is next. That way I can pop out the whole bearing unit when it dies the ball-bearing's inevitable death in headset applications. We used to run caged bearings until the first set of pits in the lower race, then loose balls to add bearings and load more and different areas of the race until the final death knell. With cartridge bearings you get to toss the whole thing, balls, races and all. The cups are just seats. So you dispose of more metal with each major service, but you start completely fresh. If you're confident you can get the old metal into a reliable recycling stream it isn't quite so spendthrift with the Earth's resources.
The other musings will have to wait. I need to go to the dentist, then drop by work on my day off, then do my taxes. I don't think I'll even have a chance to ride today, unless it's on the rollers. Oh, and I have a meeting tonight, so there goes evening training time. Fun day, huh?
Full Speed Ahead still shows it in their lineup on the company website. I haven't launched a wider search for a distributor because we're not open with any of them. For one or two headsets I would scout around for a discount source, probably online. But I haven't given up on finding a good source not only for me but for customers for whom I frequently prescribed the headsets.
Needle bearing headsets seem to have gone completely out of fashion in favor of various kinds of balls. Is that because they never wear out, so companies realized they needed to kill off the product before it killed them?
Neither the Quality nor the Far East catalog show any needle bearing headsets. And a reader has reported to me that he managed to find a Stronglight one for his bike, but was told they're running out and no more will be available.
I haven't picked a second choice yet. I'm not on the Chris King band wagon. I have always liked finding the "just right" component for a mid-range price rather than just plunking down the biggest bucks and assuming I'm getting the best. It's like finding that undiscovered cheap wine that confounds the experts. The price may be in the upper mid range, but it's still not in the queue with the high-end lemmings jumping off a particular brand name cliff. That's why the FSA Orbit UF was so attractive. Great product, great price and no one looked twice at it. It just sat there doing its job. Oh well.
I guess some kind of cartridge bearing is next. That way I can pop out the whole bearing unit when it dies the ball-bearing's inevitable death in headset applications. We used to run caged bearings until the first set of pits in the lower race, then loose balls to add bearings and load more and different areas of the race until the final death knell. With cartridge bearings you get to toss the whole thing, balls, races and all. The cups are just seats. So you dispose of more metal with each major service, but you start completely fresh. If you're confident you can get the old metal into a reliable recycling stream it isn't quite so spendthrift with the Earth's resources.
The other musings will have to wait. I need to go to the dentist, then drop by work on my day off, then do my taxes. I don't think I'll even have a chance to ride today, unless it's on the rollers. Oh, and I have a meeting tonight, so there goes evening training time. Fun day, huh?
Tuesday, April 01, 2008
Leaning toward a Traveler's Check
As my fixed gear frame hits 30 years old, I start to think about replacing it. The Surly Cross Check has very similar geometry to the old Super Course, but with a higher bottom bracket and perhaps slightly sportier rear stays. The frames in the basement would do for a knock-together beater for pure urban assault, but I put in longer miles on open roads up here.
The Traveler's Check offers at least two bikes in one, since I could build it with gears or without, depending on the destination. For instance, for a quick plane trip to many urban -- or even rural -- locales, I could configure it as a fixie for simple assembly and disassembly. For an air leg en route to a more major tour, it could have the full treatment with gears and more rackage. If the area offered longer road rides or terrain that might be too much work with a fixed gear, build it up with a few gears and minimal cargo capacity.
Ah the joys of friction shifting.
The next step beyond mere S and S disassembly would be mix and match front and rear frame sections. Reconfigure the frame geometry for different venues! Snap in the rear section with long stays for loaded touring, mid-length for general riding and short and snappy for agility.
Yes, I'm getting crazy here. Front end treatments have to be compatible with the ride feel of the back end, so you probably end up with just a collection of coupled frames in your desired types. But starting from the basic Cross Check geometry and dimensions, you could make minor tweaks to fine tune the platform even more to different missions. You can see how I might start down that path.
As the Next Frame to Buy, the Traveler's Check takes the adaptable Cross Check to new heights. That much is enough for now.
The Traveler's Check offers at least two bikes in one, since I could build it with gears or without, depending on the destination. For instance, for a quick plane trip to many urban -- or even rural -- locales, I could configure it as a fixie for simple assembly and disassembly. For an air leg en route to a more major tour, it could have the full treatment with gears and more rackage. If the area offered longer road rides or terrain that might be too much work with a fixed gear, build it up with a few gears and minimal cargo capacity.
Ah the joys of friction shifting.
The next step beyond mere S and S disassembly would be mix and match front and rear frame sections. Reconfigure the frame geometry for different venues! Snap in the rear section with long stays for loaded touring, mid-length for general riding and short and snappy for agility.
Yes, I'm getting crazy here. Front end treatments have to be compatible with the ride feel of the back end, so you probably end up with just a collection of coupled frames in your desired types. But starting from the basic Cross Check geometry and dimensions, you could make minor tweaks to fine tune the platform even more to different missions. You can see how I might start down that path.
As the Next Frame to Buy, the Traveler's Check takes the adaptable Cross Check to new heights. That much is enough for now.
Subscribe to:
Posts (Atom)